Corrosion Block Grease is designed to provide maximum protection under severe conditions.  Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Greasestrongly resists water wash out and provides superior protection against rust and corrosion.

Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.

High Performance Waterproof Grease, Won’t Dry or Wash Out

PERFORMANCE FEATURES

• WATERPROOF

• Multi grease compatible

• Excellent thermal / oxidative stability

• Resists bleeding or melting at high temperatures

• Suitable for sealed for life applications

• Use in electrical applications that require grease

• Workplace safe & environmentally friendly

• Out performs competitive grease 5:1

It’s no secret that equipment downtime, repair and replacement are expensive. It is also no secret that regular scheduled preventive maintenance is cheaper than the repair or replacement of expensive equipment.

In these days of dwindling maintenance budgets and closer scrutiny of operating costs and procedures, you can show a real saving through preventive control of corrosion.

Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or telfon.

Corrosion Block anti-corrosion compound is a state-of-the-art material developed for the marine industry. Corrosion Block has three superior features:

• Corrosion Block is superior anti-corrosion compound.
  • It kills corrosion in progress
  • It prevents new corrosion cells from forming for 12-18 months
• Corrosion Block is an excellent penetrant.
• Corrosion Block is an excellent light lubricant.

It’s no secret that equipment downtime, repair and replacement are expensive. It is also no secret that regular scheduled preventive maintenance is cheaper than the repair or replacement of expensive equipment.

In these days of dwindling maintenance budgets and closer scrutiny of operating costs and procedures, you can show a real saving through preventive control of corrosion.

Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or telfon.

Corrosion Block anti-corrosion compound is a state-of-the-art material developed for the marine industry. Corrosion Block has three superior features:

• Corrosion Block is superior anti-corrosion compound.
  • It kills corrosion in progress
  • It prevents new corrosion cells from forming for 12-18 months
• Corrosion Block is an excellent penetrant.
• Corrosion Block is an excellent light lubricant.

It’s no secret that equipment downtime, repair and replacement are expensive. It is also no secret that regular scheduled preventive maintenance is cheaper than the repair or replacement of expensive equipment.

In these days of dwindling maintenance budgets and closer scrutiny of operating costs and procedures, you can show a real saving through preventive control of corrosion.

Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or telfon.

Corrosion Block anti-corrosion compound is a state-of-the-art material developed for the marine industry. Corrosion Block has three superior features:

• Corrosion Block is superior anti-corrosion compound.
  • It kills corrosion in progress
  • It prevents new corrosion cells from forming for 12-18 months
• Corrosion Block is an excellent penetrant.
• Corrosion Block is an excellent light lubricant.

ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion/lubricant compound, that has been specifically designed for the Aero Space Industry. Itcan be described as an ultra thin fluid film compound which must be applied on an annual basis. ACF-50 actively penetrates through the corrosion deposits to the base of the cell where it emulsifies and encapsulates the electrolyte, lifting it away from the metal surface. ACF-50 then dispels this moisture and provides an atmospheric barrier which prevents any further moisture contact, thereby keeping the cell inactive. This compound continues to actively penetrate and “creep” into the tightest of seams, lap joints, micro cracks and around rivet heads, dissipating the moisture, even salt water, in these corrosion prone areas. These unique abilities of ACF-50 remain effective for 12 months, gradually disappearing as it is chemically consumed.

ACF-50 is designed with the professional aerospace technician in mind. ACF-50 should be used within the guidelines established by the OEM or governing agency for the prevention, control, or repair of corrosion.

ACF-50’s active Thin Fluid Film chemistry penetrates corrosion deposits where it chemically emulsifies and displaces the electrolyte. This isolation process keeps the corrosion cell deactivated.

On new metal ACF-50 forms a self-healing barrier that prevents corrosion from starting. ACF-50 remains physically and chemically effective for up to two years.

It is important to emphasize that ACF-50 is also an excellent lubricant but does NOT contain any wax, resin, silicon or Teflon… compounds that can gum up mechanisms, block drain holes, or trap moisture to cause corrosion.

Although ACF-50 is used primarily in the aviation industry it can be used virtually anywhere that corrosion is a problem. Applications such as interior metal surfaces, structural assemblies, micro switches, avionic components, solenoids/motors, battery terminals etc.

ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion/lubricant compound, that has been specifically designed for the Aero Space Industry. Itcan be described as an ultra thin fluid film compound which must be applied on an annual basis. ACF-50 actively penetrates through the corrosion deposits to the base of the cell where it emulsifies and encapsulates the electrolyte, lifting it away from the metal surface. ACF-50 then dispels this moisture and provides an atmospheric barrier which prevents any further moisture contact, thereby keeping the cell inactive. This compound continues to actively penetrate and “creep” into the tightest of seams, lap joints, micro cracks and around rivet heads, dissipating the moisture, even salt water, in these corrosion prone areas. These unique abilities of ACF-50 remain effective for 12 months, gradually disappearing as it is chemically consumed.

ACF-50 is designed with the professional aerospace technician in mind. ACF-50 should be used within the guidelines established by the OEM or governing agency for the prevention, control, or repair of corrosion.

ACF-50’s active Thin Fluid Film chemistry penetrates corrosion deposits where it chemically emulsifies and displaces the electrolyte. This isolation process keeps the corrosion cell deactivated.

On new metal ACF-50 forms a self-healing barrier that prevents corrosion from starting. ACF-50 remains physically and chemically effective for up to two years.

It is important to emphasize that ACF-50 is also an excellent lubricant but does NOT contain any wax, resin, silicon or Teflon… compounds that can gum up mechanisms, block drain holes, or trap moisture to cause corrosion.

Although ACF-50 is used primarily in the aviation industry it can be used virtually anywhere that corrosion is a problem. Applications such as interior metal surfaces, structural assemblies, micro switches, avionic components, solenoids/motors, battery terminals etc.

Click to view MSDS

ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion/lubricant compound, that has been specifically designed for the Aero Space Industry. Itcan be described as an ultra thin fluid film compound which must be applied on an annual basis. ACF-50 actively penetrates through the corrosion deposits to the base of the cell where it emulsifies and encapsulates the electrolyte, lifting it away from the metal surface. ACF-50 then dispels this moisture and provides an atmospheric barrier which prevents any further moisture contact, thereby keeping the cell inactive. This compound continues to actively penetrate and “creep” into the tightest of seams, lap joints, micro cracks and around rivet heads, dissipating the moisture, even salt water, in these corrosion prone areas. These unique abilities of ACF-50 remain effective for 12 months, gradually disappearing as it is chemically consumed.

ACF-50 is designed with the professional aerospace technician in mind. ACF-50 should be used within the guidelines established by the OEM or governing agency for the prevention, control, or repair of corrosion.

ACF-50’s active Thin Fluid Film chemistry penetrates corrosion deposits where it chemically emulsifies and displaces the electrolyte. This isolation process keeps the corrosion cell deactivated.

On new metal ACF-50 forms a self-healing barrier that prevents corrosion from starting. ACF-50 remains physically and chemically effective for up to two years.

It is important to emphasize that ACF-50 is also an excellent lubricant but does NOT contain any wax, resin, silicon or Teflon… compounds that can gum up mechanisms, block drain holes, or trap moisture to cause corrosion.

Although ACF-50 is used primarily in the aviation industry it can be used virtually anywhere that corrosion is a problem. Applications such as interior metal surfaces, structural assemblies, micro switches, avionic components, solenoids/motors, battery terminals etc.

Click to view MSDS

ACF-50, Anti-Corrosion Formula, is a state of the art, anti-corrosion/lubricant compound, that has been specifically designed for the Aero Space Industry. Itcan be described as an ultra thin fluid film compound which must be applied on an annual basis. ACF-50 actively penetrates through the corrosion deposits to the base of the cell where it emulsifies and encapsulates the electrolyte, lifting it away from the metal surface. ACF-50 then dispels this moisture and provides an atmospheric barrier which prevents any further moisture contact, thereby keeping the cell inactive. This compound continues to actively penetrate and “creep” into the tightest of seams, lap joints, micro cracks and around rivet heads, dissipating the moisture, even salt water, in these corrosion prone areas. These unique abilities of ACF-50 remain effective for 12 months, gradually disappearing as it is chemically consumed.

ACF-50 is designed with the professional aerospace technician in mind. ACF-50 should be used within the guidelines established by the OEM or governing agency for the prevention, control, or repair of corrosion.

ACF-50’s active Thin Fluid Film chemistry penetrates corrosion deposits where it chemically emulsifies and displaces the electrolyte. This isolation process keeps the corrosion cell deactivated.

On new metal ACF-50 forms a self-healing barrier that prevents corrosion from starting. ACF-50 remains physically and chemically effective for up to two years.

It is important to emphasize that ACF-50 is also an excellent lubricant but does NOT contain any wax, resin, silicon or Teflon… compounds that can gum up mechanisms, block drain holes, or trap moisture to cause corrosion.

Although ACF-50 is used primarily in the aviation industry it can be used virtually anywhere that corrosion is a problem. Applications such as interior metal surfaces, structural assemblies, micro switches, avionic components, solenoids/motors, battery terminals etc.

Corrosion Block Grease is designed to provide maximum protection under severe conditions.  Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.

Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.

High Performance Waterproof Grease, Won’t Dry or Wash Out

PERFORMANCE FEATURES

• WATERPROOF

• Multi grease compatible

• Excellent thermal / oxidative stability

• Resists bleeding or melting at high temperatures

• Suitable for sealed for life applications

• Use in electrical applications that require grease

• Workplace safe & environmentally friendly

• Out performs competitive grease 5:1

Also Available in 35 pound pails, tubes, cartridges.

It’s no secret that equipment downtime, repair and replacement are expensive. It is also no secret that regular scheduled preventive maintenance is cheaper than the repair or replacement of expensive equipment.

In these days of dwindling maintenance budgets and closer scrutiny of operating costs and procedures, you can show a real saving through preventive control of corrosion.

Corrosion Block can be described as a clean, clear, ultra-thin fluid which leaves a non-greasy atmospheric barrier to protect the base metal on interior surfaces. Corrosion Block leaves no gummy residue because it contains no wax, resin, tar, asphalt, silicone or telfon.

Corrosion Block anti-corrosion compound is a state-of-the-art material developed for the marine industry. Corrosion Block has three superior features:

• Corrosion Block is superior anti-corrosion compound.
  • It kills corrosion in progress
  • It prevents new corrosion cells from forming for 12-18 months
• Corrosion Block is an excellent penetrant.
• Corrosion Block is an excellent light lubricant.